|
|
|
|
|
Ferrea 1.8T 20v Exhaust Valves
|
Our Price: $290.00 : $290.00
|
|
|
Ferrea Valvetrain components are of the highest quality available. They have super alloy materials that are used in the exhaust valves of this kit. The competitions valves are made of inconel and rated to 1750deg egt, where Ferrea's super alloy is good for 2400!!!! That's a huge difference.
|
|
|
|
|
|
|
|
Ferrea 1.8T 20v Intake and Exhaust Valve Set
|
Our Price: $758.00 : $535.00 You save $223.00!
|
|
|
Ferrea complete Intake and Exhaust Valve Set, no springs.
|
|
|
|
|
|
|
|
Ferrea 1.8T 20v Intake Valves
|
Our Price: $325.00 : $300.00 You save $25.00!
|
|
|
These are replacement intake valves that are a higher quality than stock. Although intake valves are not as crucial to the life of a motor, but if you are building a high rpm, all business 20v motor, these valves should be your first choice for your cylinderhead.
Ferrea's CNC facility is the best in the business.
|
|
|
|
|
|
|
|
Ferrea 1.8T Complete Valvetrain Kit
|
Our Price: $1,365.00 : $1,365.00
|
|
|
With any factory valvetrain there is a limit for performance, so Ferrea has developed a valve train solution to not only allow higher rev limits, but to allow for big hp, and higher EGT's.
Ferrea Valvetrain components are of the highest quality availble. They have super alloy materials that are used in the exhaust valves of this kit. The competitions valves are made of inconel and rated to 1750deg egt, where Ferrea's super alloy is good for 2400!!!! That's a huge difference.
With this kit you can take the 1.8T into 8k rpm range without issue.
We have a great deal of experience taking the 1.8T motor to new levels, we have rev'd 8800rpm on hydraulic lifters and well into the 9000rpm range on solid lifters.
|
|
|
|
|
|
|
|
Ferrea 1.8T Valve Spring/Seat and Retainer Kit
|
Our Price: $961.00 : $749.00 You save $212.00!
|
|
|
This kit is comprised of high quality parts that were built for a simple purpose. To be the best in all aspects from design, to strength / integrity and weight savings.
The valve springs have more seat pressure standard than an off the shelf cat cams spring set and the retainers are cnc machined for ultimate strength while maintaining extremely light weight.
|
|
|
|
|
|
|
|
Ferrea 2.0 FSI Valvetrain Kit
|
Our Price: $1,350.00 : $1,249.00 You save $101.00!
|
|
|
With any factory valvetrain there is a limit for performance, so Ferrea has developed a valve train solution to not only allow higher rev limits, but to allow for big hp, and higher EGT's.
Ferrea Valvetrain components are of the highest quality availble. They have super alloy materials that are used in the exhaust valves of this kit. The competitions valves are made of inconel and rated to 1750deg egt, where Ferrea's super alloy is good for 2400!!!! That's a huge difference.
With this kit you can take the fsi into 8k rpm range without issue.
Ferrea's Lifter Shim for the FSI cylinder head is designed to alleviate two major performance/reliability issues: Upon high RPM the stability of the FSI rockers have been known to diminish which can cause the rocker to be kicked off of the lifter socket and/or break the spring-retaining clips. When the engine operates at an RPM higher than it was engineered for, the rate of cycles per second becomes so extreme that it cannot maintain proper valve lash tension due to the oil pressure-filling capacity being overcome by the excessive cycle frequency of the cam lobe compressing the lifter body. Even if you are not experiencing a rocker failure, you may very well be losing significant horsepower due to the rocker not following the cam lobe properly. If this occurs within an engine then the importance of the camshaft specifications are no longer of value as the valve is no longer following the lobe properly.
|
|
|
|
|
|
|
|
Ferrea 2.0 FSI Valvetrain Kit *No Valves*
|
Our Price: $766.40 : $749.00 You save $17.40!
|
|
|
With any factory valvetrain there is a limit for performance, so Ferrea has developed a valve train solution to not only allow higher rev limits, but to allow for big hp, and higher EGT's.
Ferrea Valvetrain components are of the highest quality available. They have super alloy materials that are used in the exhaust valves of this kit. The competitions valves are made of inconel and rated to 1750deg egt, where Ferrea's super alloy is good for 2400!!!! That's a huge difference.
**This kit DOES NOT Include Valves, You are looking at the kit that does NOT include the valves, this is everything else for those who wish to use STOCK VALVES!**
With this kit you can take the fsi into 8k rpm range without issue.
Ferrea's Lifter Shim for the FSI cylinder head is designed to alleviate two major performance/reliability issues: Upon high RPM the stability of the FSI rockers have been known to diminish which can cause the rocker to be kicked off of the lifter socket and/or break the spring-retaining clips. When the engine operates at an RPM higher than it was engineered for, the rate of cycles per second becomes so extreme that it cannot maintain proper valve lash tension due to the oil pressure-filling capacity being overcome by the excessive cycle frequency of the cam lobe compressing the lifter body. Even if you are not experiencing a rocker failure, you may very well be losing significant horsepower due to the rocker not following the cam lobe properly. If this occurs within an engine then the importance of the camshaft specifications are no longer of value as the valve is no longer following the lobe properly.
|
|
|
|
|
|
|
|
Ferrea 2.5L I5 Valvetrain Kit
|
Our Price: $1,188.00 : $1,099.00 You save $89.00!
|
|
|
The 2.5L I-5 found in mk5 Jetta and Rabbit with stock valvetrain was limited to around 6500rpm.
With any factory valvetrain there is a limit for performance, so Ferrea has developed a valve train solution to not only allow higher rev limits, but to allow for big hp, and higher EGT's.
Ferrea Valvetrain components are of the highest quality availble. They have super alloy materials that are used in the exhaust valves of this kit. The competitions valves are made of inconel and rated to 1750deg egt, where Ferrea's super alloy is good for 2400!!!! That's a huge difference.
With this kit (lifter shims being very integral) you can bring the 2.5L into the 8k rpm range without issue.
Order with confidence, you are getting the best product available for your 2.5L.
|
|
|